Despite the name, watercolor papers can be used for a variety of drawing media. Cold press papers feature a heavy tooth making them suitable for artists looking to exploit the surface texture. The species of fiber used has an effect on stiffness, other things being equal. Northern softwood species impart superior stiffness compared to southern softwoods. Museum board" is the common name for 100 percent rag or cotton-fiber boards that meet the current minimum standards for archival use. Museums were among the first major users of this type of board for storing and framing artwork, hence the name. At one time, this board was also called rag board. Because there are several types of boards that contain rag or cotton that do not meet the minimum standards for archival use, the name has slowly been replaced. Despite the intro­duction of conservation boards composed of purified wood cellulose, museum boards are still overwhelmingly the board of choice for archival purposes, because rag or cotton fibers are longer than those of purified wood cellulose and are, therefore, stronger and more durable. Any picture framer knows that it is much harder to cut a mat from a museum board than a conservation board, and that cutting blades wear twice as fast when cutting a museum board.

You’ll also find illustration board with different types of paper, crafted for the best experience with a specific type of media. For example, you can find boards with watercolor paper for super absorbency with your washes like the Strathmore Illustration Board for Wet Media. Difference between illustration board, Bristol board, and poster boardThis medium-toothed paper is acid free and is priced on the lower end of the pricing scale. It is available in large and small pads and is my preferred surface for sketching.

This semi-smooth paper meets the smooth and vellum types halfway. Being a crossover of the two, this variety features a surface finish that is an amalgamation of both. Plate Bristol paper Cotton illustration boards are available in two weights-heavyweight, approx­ imately 65 pt., and lightweight, approximately 33 pt. The lightweight with reg­ ular (cold press finish) surface comes only in 22" X30". The heavyweight in regular surface and high (hot-press finish) surface is available in 20" X 30" and 30" X40".

Sandpaper For Drawing

Softwood: C. 0.13 inches (3.3mm) in length e.g. Pine and spruce which have typically long fibres and make superior paperboard in services where strength is important. Softwood makes excellent linerboard. There are mostly two types of drawing boards that you can get: Portable and Large Desks. What is poster board called in the UK? A portfolio showcasing your best work is crucial when applying for jobs or freelance gigs. It should display a range of styles and techniques to demonstrate your versatility and skill.

Then draw the inner rectangle that will form the ‘window” for your artwork. To do this, measure the margin and mark it on the widths of your mounting board. Then draw straight lines to connect both ends. Do the same for your heights. In general, nonarchival boards are not safe as a permanent support for fine artwork, although some painters have had limited success in preparing such boards for fine artwork by coating both sides with an acrylic polymer before painting. CARDBOARDS OR GROUND-WOOD BOARDS This paper features a slight, medium tooth that is capable of accepting a variety of media. This archival surface is considered a “professional surface” and is best used for finished artworks. Vellum is a smooth paper that is created by combining plastic with cotton or wood pulp materials. The material is translucent making it suitable for tracing. This type of vellum paper should not be confused with Bristol paper that has a “vellum” surface. Example: GC1 would be a "pigment coated", "virgin mechanical pulp" board with a "white reverse side". Often the used paperboard type would be FBB, which was coated on both sides.a pigment, which could be china clay, calcium carbonate or titanium dioxide, usually a combination of two Place your t-square on the illustration board so that the “T” is resting flush over the edge of the table. Place it along the line you want to cut. Draw a line along the t-square/ruler with your pencil and make marks on where your cut should end.