Remove the ruler, being careful not to shift the design. Your T-shirt and decal are now perfectly aligned! Cut the vinyl using the "Holographic Vinyl" setting with "More" Pressure, shiny side down on a green StandardGrip machine mat. You should be able to cover this entire decal in one press with the EasyPress 2. If you are using a home iron or alternate heat source, you may need to press in sections to get the entire decal. You just want to make sure all parts of the decal have been pressed for 30 seconds. Of course, you can always go a bit smaller than this, but this is the typical sizing of shirt decals that we’re all used to seeing. If you go too much smaller, your decal will be hard to see and hard to weed.

My rulers come in slightly different sizes depending on the garment you’re decorating, but they can all be cut from an 8.5″ x 11″ piece of paper. If you use the PDF, make sure that the ruler print size is at 100% to avoid making your ruler tool too big or too small.Interest badges, awards and skills builders -Guides can choose where they would like to put badges on their uniform top or dress. It's a bit hard to tell, but there is a smooth side and a rough side to the mats. Since I want the "engraved" texture to be on the underside of my ruler, I'll feel for the smooth side and place the smooth side down on my purple StrongGrip Machine Mat and use a brayer to make sure it's fully adhered. The excess will hang off the end but that won't hurt anything. A general rule of thumb is to align the top of the design right around where the tip of the hood lays so that none (or very little) of the design is hidden.

Union flag badge-this badge should be worn at international events,on the left shoulder of the uniform top.When the cut is finished, don't remove the mat! First, gently lift up a corner to make sure the ruler's shape is completely cut out. If not, press the "Go" button to repeat the cut process. It should go all the way through now. NOTE: The T-shirt rulers are already sized correctly so you do not have to worry about re-sizing. The Adult rulers should be approx. 5" H x 10.39"W, and the Youth/Toddler/Infant rulers should be 10" W x 4.5" H.