Hydra Fountain Clear Water Feature Cleaner | 250ml Treats 7,500L Highest Dilution Rates - Water Feature Treatment Keeps Water Crystal Clear from Algae, Cleans Water & Biofilm Build-up

Product Information

Nobody wants their water feature to look unsightly with slime type algae, filamentous algae and single-cell algae (which cause water to look green). PUMP WATER FEATURE ISSUES Maintenance Dose: Add 25ml of Fountain Clear every week from March to September and every two weeks at other times. Regular use will prevent re-contamination. Nature's way is if there is a food source, moisture and sunlight, something will grow, as there are always trillions of spores in the atmosphere waiting for their opportunity to germinate. Both of these can be applied with a toothbrush so that you can get down to the deepest parts of the pump without issue. You can also use pipe cleaners. Refill With Distilled Water

Water pumps often become clogged with dirt, leaves, and other natural debris that come with the outdoor location. This leads to poor water circulation, in turn causing the liquid to turn a lovely shade of brownish-green. Existing Features: Empty feature and remove any dirt or algae by scrubbing with a solution of hot water, detergent and 25ml of Fountain Clear. Rinse thoroughly with clean water and dose as above. For features containing over 100 litres (22 gall) of water, use 50ml each time.Use at 1:30,000 (1 ml per 30 litres) to protect clean water from algae and green water (single-cell algae) contamination. Treat weekly-monthly depending on local conditions. Discharge of the low concentrations commonly used in fountains poses no environmental threat. Because of its rapid hydrolysis, Hydra Fountain Clear is not recommended for use in systems above pH 9.0. TYPICAL QUESTIONS While it’s crucial to keep your pump clean, it’s also just as important to replace it. Typical pumps last three to five years. Repeat the Process The best fountain and water feature, total water sterilisation and protection against algae and green water in all water recirculation systems, Shelf life of three years. You can use a cover, either made specifically for fountains or fashioned from a tarp, to keep unwanted items out of your fountain at night or in bad weather. Simply wrap it around your centerpiece tightly and remove it in the morning to minimize disturbance.

By using this tool, you can slow the growth of the inevitable green and keep your fountain crystal clear for longer. Use A CoverNext, we need to get rid of the remaining excess. Some of the most common methods of dirt/algae removal include the use of: The best kind of water to use in your fountain is distilled. This works best because it’s pure water. The pump has an easier time pushing it through, so it will last longer and keep your water cleaner for a more significant amount of time. Once the fountain is full, you should once again have a clear and glistening centerpiece. However, without proper care, the water will become dirty again. There are also some additional preventative measures you can take. Algae and Dirt Preventatives